QS-07 · Computational materials laboratory
Doping & Mutation Engine
Advanced Semiconductor Doping, Atomic Defect Engineering & Material Transformation.
- Original host sites
- 64
- Substitution
- 0 · 0.000%
- Vacancies / interstitials
- 0 / 0
- Concentration / cm⁻³
- 0.000e+0
Guided investigation · Si → Ge
- 1. Replace a host site; inspect identity and unchanged starting position.
- 2. Apply strain and compare bond lengths and cell volume.
- 3. Relax supported Si/Ge; check force convergence before interpreting energy.
- 4. Save the complete experiment and export the method record.
- Phase
- Diamond cubic
- Vacancy concentration
- 0.000%
- Periodic cell lengths / Å
- 10.862 / 10.862 / 10.862
- Geometry validation
- No radius-cutoff overlaps
| ID | Element | Coordinates / Å | Coordination |
|---|---|---|---|
| Si | 0.0000 , 0.0000 , 0.0000 | 4 | |
| Si | 2.7155 , 2.7155 , 0.0000 | 4 | |
| Si | 2.7155 , 0.0000 , 2.7155 | 4 | |
| Si | 0.0000 , 2.7155 , 2.7155 | 4 | |
| Si | 1.3578 , 1.3578 , 1.3578 | 4 | |
| Si | 4.0732 , 4.0732 , 1.3578 | 4 | |
| Si | 4.0732 , 1.3578 , 4.0732 | 4 | |
| Si | 1.3578 , 4.0732 , 4.0732 | 4 | |
| Si | 0.0000 , 0.0000 , 5.4310 | 4 | |
| Si | 2.7155 , 2.7155 , 5.4310 | 4 | |
| Si | 2.7155 , 0.0000 , 8.1465 | 4 | |
| Si | 0.0000 , 2.7155 , 8.1465 | 4 | |
| Si | 1.3578 , 1.3578 , 6.7888 | 4 | |
| Si | 4.0732 , 4.0732 , 6.7888 | 4 | |
| Si | 4.0732 , 1.3578 , 9.5043 | 4 | |
| Si | 1.3578 , 4.0732 , 9.5043 | 4 | |
| Si | 0.0000 , 5.4310 , 0.0000 | 4 | |
| Si | 2.7155 , 8.1465 , 0.0000 | 4 | |
| Si | 2.7155 , 5.4310 , 2.7155 | 4 | |
| Si | 0.0000 , 8.1465 , 2.7155 | 4 | |
| Si | 1.3578 , 6.7888 , 1.3578 | 4 | |
| Si | 4.0732 , 9.5043 , 1.3578 | 4 | |
| Si | 4.0732 , 6.7888 , 4.0732 | 4 | |
| Si | 1.3578 , 9.5043 , 4.0732 | 4 | |
| Si | 0.0000 , 5.4310 , 5.4310 | 4 | |
| Si | 2.7155 , 8.1465 , 5.4310 | 4 | |
| Si | 2.7155 , 5.4310 , 8.1465 | 4 | |
| Si | 0.0000 , 8.1465 , 8.1465 | 4 | |
| Si | 1.3578 , 6.7888 , 6.7888 | 4 | |
| Si | 4.0732 , 9.5043 , 6.7888 | 4 | |
| Si | 4.0732 , 6.7888 , 9.5043 | 4 | |
| Si | 1.3578 , 9.5043 , 9.5043 | 4 | |
| Si | 5.4310 , 0.0000 , 0.0000 | 4 | |
| Si | 8.1465 , 2.7155 , 0.0000 | 4 | |
| Si | 8.1465 , 0.0000 , 2.7155 | 4 | |
| Si | 5.4310 , 2.7155 , 2.7155 | 4 | |
| Si | 6.7888 , 1.3578 , 1.3578 | 4 | |
| Si | 9.5043 , 4.0732 , 1.3578 | 4 | |
| Si | 9.5043 , 1.3578 , 4.0732 | 4 | |
| Si | 6.7888 , 4.0732 , 4.0732 | 4 | |
| Si | 5.4310 , 0.0000 , 5.4310 | 4 | |
| Si | 8.1465 , 2.7155 , 5.4310 | 4 | |
| Si | 8.1465 , 0.0000 , 8.1465 | 4 | |
| Si | 5.4310 , 2.7155 , 8.1465 | 4 | |
| Si | 6.7888 , 1.3578 , 6.7888 | 4 | |
| Si | 9.5043 , 4.0732 , 6.7888 | 4 | |
| Si | 9.5043 , 1.3578 , 9.5043 | 4 | |
| Si | 6.7888 , 4.0732 , 9.5043 | 4 | |
| Si | 5.4310 , 5.4310 , 0.0000 | 4 | |
| Si | 8.1465 , 8.1465 , 0.0000 | 4 | |
| Si | 8.1465 , 5.4310 , 2.7155 | 4 | |
| Si | 5.4310 , 8.1465 , 2.7155 | 4 | |
| Si | 6.7888 , 6.7888 , 1.3578 | 4 | |
| Si | 9.5043 , 9.5043 , 1.3578 | 4 | |
| Si | 9.5043 , 6.7888 , 4.0732 | 4 | |
| Si | 6.7888 , 9.5043 , 4.0732 | 4 | |
| Si | 5.4310 , 5.4310 , 5.4310 | 4 | |
| Si | 8.1465 , 8.1465 , 5.4310 | 4 | |
| Si | 8.1465 , 5.4310 , 8.1465 | 4 | |
| Si | 5.4310 , 8.1465 , 8.1465 | 4 | |
| Si | 6.7888 , 6.7888 , 6.7888 | 4 | |
| Si | 9.5043 , 9.5043 , 6.7888 | 4 | |
| Si | 9.5043 , 6.7888 , 9.5043 | 4 | |
| Si | 6.7888 , 9.5043 , 9.5043 | 4 |
CIF imports require expanded P 1 sites. XYZ without lattice uses the displayed current cell. QE export is an input deck requiring compatible UPF files, not calculated results.
Semiconductor & Defect Tools
Defect Inspector
Click any atom in the 3D view. Showing the defect site.
Nearest neighbours — bond lengths
Lattice deformation
Relaxation energy
Drag to pan · Shift + scroll to zoom · hover for coordinates
Radial defect profile
Drag to pan · Shift + scroll to zoom · hover for coordinates
Displacement falls off with distance; atoms beyond 8.2 Å are clamped to bulk.
Doping conditions
Dopant fraction ≈ 2.00 × 10⁻⁷ of host atoms. The 3D view shows one isolated defect; concentration enters the carrier model.
Electronic structure
Band diagram — pure vs doped
Density of states & occupation
Drag to pan · Shift + scroll to zoom · hover for coordinates
Valence band drawn negative for clarity. Shapes are √E model DOS; the impurity level is broadened by k_BT for display.
Carrier concentration vs 1000/T
Drag to pan · Shift + scroll to zoom · hover for coordinates
Left: intrinsic region. Middle plateau: full ionization (n ≈ N). Right: freeze-out as carriers return to the impurity.
Conductivity vs concentration
Drag to pan · Shift + scroll to zoom · hover for coordinates
Bond-length distribution
Drag to pan · Shift + scroll to zoom · hover for coordinates
Before / after
Band gap: Reference data. Carrier values: calculated from the model above.
Compare dopants
Material — Silicon
Dopant — Phosphorus
Measured shallow-level ionization energy
What's happening?
Phosphorus (radius 1.07 Å) replaces Si (radius 1.11 Å). Because it is smaller, neighbours move inward — by 0.0147 Å in this model. P has one more valence electron than Si; it is loosely bound and can be given to the conduction band. At 300 K, 100% of the donors give up their electron, so the material is n-type with σ = 1.77 S/cm (pure: 1.79 × 10⁻⁶ S/cm).
Electron flow through the doped crystal
● electrons · ● holes · coloured discs = P sites ("+"/"−" = ionized, orbiting dot = still bound). Dots drawn: 56 e⁻ / 0 h⁺ on a log scale; jitter grows with √T, scattering with lower mobility.
Vibration modes (phonons) and how doping changes them
Drag to pan · Shift + scroll to zoom · hover for coordinates
Drag to pan · Shift + scroll to zoom · hover for coordinates
P is heavier than Si, so no mode splits off above the band; the existing modes shift slightly and are scattered near the dopant.
Experiment mode
Host: Silicon (change it in the control bar)
Each run solves the same carrier model as above; no noise is added, so results are exact model values, not lab data.
No runs yet. Set conditions and press “Run simulation”, then change a condition and run again to compare.
Defect library
Phosphorus donor in silicon
Si · Shallow donor
The textbook donor: one extra valence electron, weakly bound, almost fully ionized at room temperature.
Examples: n-type Si wafers, MOSFET source/drain, Si:P qubits
Arsenic donor in silicon
Si · Shallow donor
Low diffusivity makes As the donor of choice for sharp doping profiles.
Examples: Shallow junctions, Buried layers
Boron acceptor in silicon
Si · Shallow acceptor
The standard p-type dopant. Small radius pulls neighbours inward.
Examples: p-type Si wafers, Solar-cell base, p-well
Indium acceptor in silicon
Si · Moderately deep acceptor
Deeper than B, so a sizable fraction stays neutral at 300 K.
Examples: Si:In IR detectors
Silicon vacancy
Si · Native defect, deep levels
Four dangling bonds reconstruct with a Jahn–Teller distortion; mobile above ~150 K and binds to dopants and oxygen.
Examples: Ion-implanted Si, Irradiated detectors
E-centre (phosphorus–vacancy pair)
Si · Deep acceptor
A vacancy trapped next to P removes the donor and adds a deep trap.
Examples: Radiation-damaged n-Si
A-centre (oxygen–vacancy pair)
Si · Deep acceptor
The most common irradiation defect in oxygen-rich silicon.
Examples: Czochralski Si after irradiation
Interstitial oxygen in silicon
Si · Electrically inactive (isolated)
Sits in a bond-centred position; annealing at ~450 °C forms thermal donors.
Examples: Czochralski wafers, Intrinsic gettering
Arsenic antisite (EL2) in GaAs
GaAs · Deep donor
Pins the Fermi level mid-gap, which is what makes undoped GaAs semi-insulating.
Examples: Semi-insulating GaAs substrates
Silicon in GaAs (amphoteric)
GaAs · Donor on Ga site, acceptor on As site
Growth conditions decide which sublattice Si occupies, so it can compensate itself at high concentration.
Examples: n-GaAs epilayers, HEMTs
Magnesium acceptor in GaN
GaN · Deep-ish acceptor
Only a few % ionize at room temperature, which is why p-GaN is resistive.
Examples: Blue/white LEDs, GaN p-contacts
Silicon donor in GaN
GaN · Shallow donor
The standard n-type dopant for nitrides.
Examples: n-GaN LED layers
Oxygen vacancy in ZnO
ZnO · Deep donor
Long blamed for n-type ZnO; theory shows it is too deep to give free electrons.
Examples: Green luminescence studies, Gas sensors
Graphitic nitrogen in graphene
Graphene · n-type dopant
Shifts the Dirac point below the Fermi level.
Examples: N-doped graphene electrodes
Sulfur vacancy in MoS₂
MoS₂ · Deep acceptor-like states
The most common point defect in MoS₂; adds in-gap states and limits mobility.
Examples: Exfoliated / CVD MoS₂ transistors
Nitrogen-vacancy centre in diamond
Diamond · Deep, optically active
Diamond is not yet in the lab's material dataset, so this entry cannot be loaded into the 3D view.
Examples: Quantum sensing, Single-photon sources
Host not in lab dataset yetExport
QS-07 · Methods
Methods, units & citations
- units
- cm⁻³ (3D), cm⁻² (2D), eV, K
- ▸Charge-neutrality Fermi level (bisection)
- ▸Harmonic spring relaxation (FIRE, model)
- ▸Structure-factor powder XRD
- ▸Diatomic-chain phonons calibrated to Raman Γ modes
References
- [1]Sze S. M., Ng K. K. Physics of Semiconductor Devices, 3rd ed.. Wiley (2007).
- [2]Bitzek E. et al. Structural relaxation made simple (FIRE). Phys. Rev. Lett. 97, 170201 (2006).
- [3]Madelung O. Semiconductors: Data Handbook. Springer (2004).
How to cite
Quantiphy Studio — Doping & Mutation Engine module (2026). https://pixel-perfect-view-1726.lovable.app/doping-lab